24-07-14, 08:09 PM
Rite,. Here is the so far....
Hotwire starter trrminal to battery, motor turns fine
Hotwire to starter relay output, fine
Check run switch continuity , fine. But I could always hear the relay click when I switch on the run switch
Still clicks when using starter switch...
Check continuity of starter relay when switch pressed, fine
Check voltage across starter relay, fine
Check loom at starter relay, fine, power and continuity ok
Check starter cutoff relay according to manual using multimeter connected to various terminals of the relay, fine
Check loom connector to starter cutoff relay according to manual, fine
Clicks. Arggggg
Check neutral switch continuity, OK
Click . grrrrrrrr
Take off all loom connectors in start circuit and spray with contact cleaner... Lots. Let drip n dry. Spray all relay terminals too.
press start switch and expect click, but,...START, TURN, IGNITION FIRE. Running, so far....VOILA
Problem was always intermittent but got worse to the point that 9 out of 10 starts failed. so i will leave and run for a few days and report back... I know it's just going to come back though!!
Only thing I didn't check was main switch but I get all instruments and relays on so this must be fine
Hotwire starter trrminal to battery, motor turns fine
Hotwire to starter relay output, fine
Check run switch continuity , fine. But I could always hear the relay click when I switch on the run switch
Still clicks when using starter switch...
Check continuity of starter relay when switch pressed, fine
Check voltage across starter relay, fine
Check loom at starter relay, fine, power and continuity ok
Check starter cutoff relay according to manual using multimeter connected to various terminals of the relay, fine
Check loom connector to starter cutoff relay according to manual, fine
Clicks. Arggggg
Check neutral switch continuity, OK
Click . grrrrrrrr
Take off all loom connectors in start circuit and spray with contact cleaner... Lots. Let drip n dry. Spray all relay terminals too.
press start switch and expect click, but,...START, TURN, IGNITION FIRE. Running, so far....VOILA
Problem was always intermittent but got worse to the point that 9 out of 10 starts failed. so i will leave and run for a few days and report back... I know it's just going to come back though!!
Only thing I didn't check was main switch but I get all instruments and relays on so this must be fine