03-07-14, 08:33 PM
Before you check the TPs ensure you have the proper security Torx tool to loosen the bolts.
Now check it, if it hits 10k or 0 adjust it until it hits 5k.
Switch off the iginition
If however you cannot adjust it from 10k down to 5k and have loosened the bolts, tighten the bolts (don't overtighten) and start the engine.
Only switch off the ignition if it is at 0 or 5k.
Now check it, if it hits 10k or 0 adjust it until it hits 5k.
Switch off the iginition
If however you cannot adjust it from 10k down to 5k and have loosened the bolts, tighten the bolts (don't overtighten) and start the engine.
Only switch off the ignition if it is at 0 or 5k.