(02-07-14, 11:48 PM)Rexr link Wrote: I drilled my rivet out before putting the can on the bike.......as for the foccer said above yes it does look like u've made a mistake, with my Mivv there was a long mounting bolt with a big cotton reel type spacer, I junked this and used a shorter bolt......(both ends of the clamp should be mated together on the outside of the foot peg bracket)
I used original bolt which is a bit too long to be frank. I still used the reel spacer on the inside as per instructions with clamps mated on the outside. It feels solid.
I presume you drilled the head inside the exhaust? I will see about the noise with baffle in and might get the baffle out
Paul