02-07-14, 05:03 PM
Not technically just today [been doing this project on and off since last friday], fitted an UTCOMP trip computer.
Records mpg, 0-60, temperatures etc.
![[Image: QDk-0OwWTnNb4iamyd4M7BsJIfp8MGlS5UyfU4VfjhI=s196-p-no]](https://lh6.googleusercontent.com/QDk-0OwWTnNb4iamyd4M7BsJIfp8MGlS5UyfU4VfjhI=s196-p-no)
![[Image: 20140702_165256.jpg]](https://lh6.googleusercontent.com/-Ni6MV4IQktY/U7Qq7E7sGcI/AAAAAAAAAm4/-VIJQW1x_kc/w756-h567-no/20140702_165256.jpg)
![[Image: 20140701_163836.jpg]](https://lh5.googleusercontent.com/-D8LLEhIrngs/U7LWPVUIG6I/AAAAAAAAAlU/5-RtEfRhiK0/w756-h567-no/20140701_163836.jpg)
![[Image: 20140701_163819.jpg]](https://lh5.googleusercontent.com/-H0Zd64EFDyE/U7LWFMfJW5I/AAAAAAAAAkg/4H6Ghjbf7Ew/w756-h567-no/20140701_163819.jpg)
Works a treat - need to tweak the VSS a touch speedo out from my speedotuner calibrated speed by 4%.
Also need to alter the injection flowrate up from 205cc/min to 235cc/min (i rough guessed, but found a site that suggests Denso injected big yams are the second flowrate).
Need to tidy up the loom too.
Records mpg, 0-60, temperatures etc.
![[Image: 20140702_165256.jpg]](https://lh6.googleusercontent.com/-Ni6MV4IQktY/U7Qq7E7sGcI/AAAAAAAAAm4/-VIJQW1x_kc/w756-h567-no/20140702_165256.jpg)
![[Image: 20140701_163836.jpg]](https://lh5.googleusercontent.com/-D8LLEhIrngs/U7LWPVUIG6I/AAAAAAAAAlU/5-RtEfRhiK0/w756-h567-no/20140701_163836.jpg)
![[Image: 20140701_163819.jpg]](https://lh5.googleusercontent.com/-H0Zd64EFDyE/U7LWFMfJW5I/AAAAAAAAAkg/4H6Ghjbf7Ew/w756-h567-no/20140701_163819.jpg)
Works a treat - need to tweak the VSS a touch speedo out from my speedotuner calibrated speed by 4%.
Also need to alter the injection flowrate up from 205cc/min to 235cc/min (i rough guessed, but found a site that suggests Denso injected big yams are the second flowrate).
Need to tidy up the loom too.