what did you do with your fazer today ?

[unfazed]

[quote author=unfazed link=topic=6412.msg153753#msg153753 date=1402781466]
[quote author=bigbluebear link=topic=6412.msg153731#msg153731 date=1402778194]
[quote author=unfazed link=topic=6412.msg153723#msg153723 date=1402776275]
[quote author=bigbluebear link=topic=6412.msg153696#msg153696 date=1402769654]
Went to Largs, exup focced again

What is wrong with it?
[/quote]

Servo is sticking.... It's happened before and gave it a dousing of lub, it may better replacing it but they're expensive
[/quote]

I had the same problem, drove me to distraction.  :'( Took it apart completely, everything moving freely, motor spinning freely when connected, put it back together same Foccing problem.  :rolleyes At that time the secondhand one arrived and I put the old one aside in a box waiting to be looked at again. The part which controls the motor was causing problem, but have not figured out why yet.

There are plenty on Ebay.com. I bought one from one of the fellows on her, but bought another for a friend from the States with cables for $50 incl postage. Postage was 3 times the price of the servo but much cheaper than a new one.

One on ebay uk at the moment for £65
[/quote]

Yeah I've been looking on eBay, but like you worried it's something else and I've wasted £65 and I've still got the problem.


[/quote]

If the EXUP valve is moving freely and cables are moving freely then your next option is to remove the motor and check it.
I had the EXUP valve in and out about 5 times before I decided to check the motor.
Take out the motor
Hold the rear of the motor in one hand and try and turn the pulley wheel with the other hand.
It should turn freely with just a little resistance (a large gear turning a small gear through a series of gears).
If it needs a lot of force to turn it in either direction its focced. :'(