24-05-14, 02:08 PM
I bought a cheap short front set and stripped them both then used the short spacer with the rear indicators with the long leads and mounted them on the carrier using a 80mm piece of square black plastic gutter down pipe. :eek
I cut the gutter down pipe piece in half to make two right angle pieces then drilled each piece to take the indicators and fit the carrier. Finally shaped it so it looks better.
Wires were then long enough to go up next to the rear light and into the connectors.
See picture
I cut the gutter down pipe piece in half to make two right angle pieces then drilled each piece to take the indicators and fit the carrier. Finally shaped it so it looks better.
Wires were then long enough to go up next to the rear light and into the connectors.
See picture