20-05-14, 10:17 PM
These brackets bolt under the rear grab rail, and are simply clamped in place by it. The position on the pannier bracket which bolts to the top box rack on an fz6 bolts to these instead.
The other mount on the givi brackets is where it connects to the footpeg mount, it is designed to mount under the footpeg on an fz6 but this is not possible on the fzs600 due to the position of the exhaust, so I bolted it above the footpeg instead, and by using the spacers that come with the kit the footpegs still fold back up out of the way.
Other than that the only change required is to lengthen the bar which connects the two sides by approx 15mm, I just cut it in the centre and welded a small piece in to make it longer.
The other mount on the givi brackets is where it connects to the footpeg mount, it is designed to mount under the footpeg on an fz6 but this is not possible on the fzs600 due to the position of the exhaust, so I bolted it above the footpeg instead, and by using the spacers that come with the kit the footpegs still fold back up out of the way.
Other than that the only change required is to lengthen the bar which connects the two sides by approx 15mm, I just cut it in the centre and welded a small piece in to make it longer.