20-05-14, 08:17 PM 
		
	
	
		As per Pats instructions . Took the throttle housing cover off and lubed the cables , took the choke housing cover off  and removed the clutch lever and lubed the cables , also cleaned and applied wd40 to the electrical terminals .
Removed the exup valve and cleaned and regreased and reassembled , and lubed the exup cables , whilst doing this noticed the bottom exup cable is frayed , something to keep an eye on .
	
	
	
	
Removed the exup valve and cleaned and regreased and reassembled , and lubed the exup cables , whilst doing this noticed the bottom exup cable is frayed , something to keep an eye on .

 
 

 
