Any DIY experts on here?

[midden]

[quote author=midden link=topic=12354.msg138041#msg138041 date=1396133963]
[quote author=fazersharp link=topic=12354.msg137975#msg137975 date=1396104991]

the large space is hard to get a good finish. Although that could be my lack of skill

I supose it does take practice.

Sorry I was in part being polite


and sorry again but better to silicone without masking tape as it results in high edge which can get pulled up when  tape is removed.
[/quote]


Electrical tape is better than masking tape - no high edge and the silicone doesnt stick to it as bad.
[/quote]
That's one to note ........though i tend to free hand and use wetted finger or cloth to shape in and wipe the edges at same time [size=78%]

[/size]
[/size]
[/size][size=78%]author=fazersharp link=topic=12354.msg138161#msg138161 date=1396208445][/size]Ive put some black silicone in my cracked carb inlet rubbers 

Oh cool idea, make do and mend approach, has it worked well and did you use a heat proof or standard silicone




[quote author=dazza link=topic=12354.msg138166#msg138166 date=1396208779]
[quote author=fazersharp link=topic=12354.msg138161#msg138161 date=1396208445]
Ive put some black silicone in my crack and I'm wearing a rubber 

:eek
[/quote]


No chance of you getting pregnant then