TUTORO MOTORCYCLE CHAIN OILER KIT

[Grandma]

Not FZ8 it is Fazer 8, problem was with swinging arm, as tapered allowing too much movement , so taped over cable ties to stop them sliding and moving nozzles out of place, now working like a dream.


I have fitted the scottoiler and now I will try fitting the dual injector. Could you if possible post a photo of what you've done...thanks.

Will try and take one later today as have grandsons all day and school runs etc. Resevoir under seat, and once nozzles in position on sprockect, taped over cable ties to stop them moving, so oil drips in correct place. Think my glitch also was with an air lock, so just primed it again, and has been working fine for weeks now after problems with movement and chewing up nozzles and oil not coming through.