|
Front wheel issue
|
20-02-14, 05:58 PM
Found the issue out. Someone had used the original back plates (shims) on the EBC pads that were in the calliper, these are only for original pads and not after market pads. Also took the shim off the rear pads which freed the rear wheel up big time. After market pads are made the same thickness as the original with the plate on. No need to put the backing plate on aftermarket pads as this pushes the pads closer to the disc and causes a tight wheel
|
|
« Next Oldest | Next Newest »
|
| Messages In This Thread |
|
Front wheel issue - by Kentish - 18-02-14, 08:31 PM
Re: Front wheel issue - by fazersharp - 18-02-14, 08:51 PM
Re: Front wheel issue - by Kentish - 18-02-14, 09:49 PM
Re: Front wheel issue - by Buzz - 19-02-14, 09:59 AM
Re: Front wheel issue - by fazersharp - 19-02-14, 01:41 PM
Re: Front wheel issue - by cfoley - 19-02-14, 02:34 PM
Re: Front wheel issue - by Kentish - 20-02-14, 05:58 PM
Re: Front wheel issue - by fazersharp - 20-02-14, 06:59 PM
Re: Front wheel issue - by ChristoT - 20-02-14, 07:32 PM
Re: Front wheel issue - by fazersharp - 20-02-14, 08:36 PM
Re: Front wheel issue - by johna6968 - 20-02-14, 08:37 PM
Re: Front wheel issue - by Dead Eye - 20-02-14, 08:40 PM
Re: Front wheel issue - by Lez72 - 20-02-14, 08:47 PM
Re: Front wheel issue - by red98 - 20-02-14, 08:48 PM
Re: Front wheel issue - by Kentish - 21-02-14, 08:57 PM
|
