changing generator cover and front fairing

[Lez72]

The front fairing is pretty straight forward as stated above. The generator cover is also straight forward in theory although I took mine off a few months back to get it powdercoated and once I had undone all the bolts there was still a lot of resistance caused by the magnetic pull from the generator. At first I thought I had left a bolt in. As long as you bear this in mind and keep pulling at it like something demented it will eventually come off. Its easier to prise it off a little bit and then slip something inside the gap you will have created but if using this method be careful not the distort the casing edge if aesthetics are important to you. There are also 2 locator pegs situated in 2 of the bolts holes which you need to make sure you don't lose.

Good luck with it.