Upside down fork options

[Ruby Racing]

And that is why there is a Honda Bros 400 swingarm in my boot. :lol

Interesting info on the T-Cat ignition box, but I'm not 100% sure I know what you're talking about! Could you please elaborate?

You do understand! You can get therapy for it, I'm pretty sure.


Well it's the ECU for the motor. It's only a theory at this point, but as the Fazer motor is basically a Thundercat motor, then it seems logical to assume you can use the Ignitor Unit from the Thundercat to replace the Fazer one. You just have to make sure you connect the wires up correctly as the TC Igniter Unit has three connectors compared to the two on the Fazer Igniter Unit. Just means you need an extra block connector and to change some of the wires around in the block connectors. I've had my electrician mate look at the wiring diagrams and he thinks it'll work.


But it might not come to that if running a wire (or wires) off to the loom from the Koso speedo sensor does the job. The Koso speedo sensor and the OE speedo sensor are just a sensor and some magnets, so if you keep the TPS in the loop there's a good chance you won't get any fault codes. I'm guessing when others have fitted aftermarket speedos they just run the wires from the speedo sensor up to the speedo. If you also maintain the connection back into the loom, there is a good chance you will avoid any issues. That's my theory anyway.