05-01-14, 04:24 PM
I would like to firstly wish you all a happy new year and thank you all for your advice.
I took the offending valve out snapped a bolt in the chamber while I was at it.
so with a drill and a tap and some bending and patience its re assembled and operating correctly until it gets warm then the bloody thing starts to rattle like a stone in a can all the bushes are in the correct positions there's plenty of grease my cables are adjusted and oiled I have no warning codes.
can anyone tell me the correct way to re-assemble the washer spring arrangement on the cable carrier on the downpipe just in case I've done it wrong.
Many thanks for all your help.
Dave. :'(
I took the offending valve out snapped a bolt in the chamber while I was at it.
so with a drill and a tap and some bending and patience its re assembled and operating correctly until it gets warm then the bloody thing starts to rattle like a stone in a can all the bushes are in the correct positions there's plenty of grease my cables are adjusted and oiled I have no warning codes.
can anyone tell me the correct way to re-assemble the washer spring arrangement on the cable carrier on the downpipe just in case I've done it wrong.
Many thanks for all your help.
Dave. :'(
Fines are cheaper than front tyres!!