Getting front sprocket back on the shaft Gen 1 Thou
|
Getting front sprocket back on the shaft Gen 1 Thou
|
19-12-13, 07:39 AM
camshaft, just be aware that the nut holding the front sprocket on is prone to undoing itself , especially if the tab washer is worn. I would do a double check after a month or so , and maybe regular checks.Its not a service item as such, just what we have seen from experience. Its always a good thing to clean out around the sprocket at least annually in any case.
|
|
« Next Oldest | Next Newest »
|
| Messages In This Thread |
|
Getting front sprocket back on the shaft Gen 1 Thou - by Camshaft - 08-12-13, 07:30 AM
Re: Getting front sprocket back on the shaft Gen 1 Thou - by Dead Eye - 08-12-13, 11:52 AM
Re: Getting front sprocket back on the shaft Gen 1 Thou - by Camshaft - 09-12-13, 10:37 AM
Re: Getting front sprocket back on the shaft Gen 1 Thou - by Tmation - 09-12-13, 11:21 AM
Re: Getting front sprocket back on the shaft Gen 1 Thou - by Camshaft - 09-12-13, 11:37 AM
Re: Getting front sprocket back on the shaft Gen 1 Thou - by pitternator - 19-12-13, 07:39 AM
Re: Getting front sprocket back on the shaft Gen 1 Thou - by PieEater - 19-12-13, 08:42 AM
|
