18-12-13, 11:40 PM
I had similar idle problems with my last T,cat, but also when I raised the idle the engine revs would 'hang' at about 3000 when releasing the throttle, very slowly dropping.
solution for me was adjusting the pilot screw setting.
Haynes says they should be 1 and 3/8ths turned out, which when I checked they were, but after lots of searching on tinterweb I found out to try 2.5 turns out from fully in- fixed it
solution for me was adjusting the pilot screw setting.
Haynes says they should be 1 and 3/8ths turned out, which when I checked they were, but after lots of searching on tinterweb I found out to try 2.5 turns out from fully in- fixed it
Some say...