|
Sheared a bolt
|
13-12-13, 01:12 AM
Personally i would drill it out. I would start with the smallest metal drill bit and make sure the first hole is centre and straight. it doesn't matter how long it takes, then go next size up and continue until a few mm from the edges, then use a bolt that is a tight fit and try to thread onto remainder of disc bolt and hopefully with all the drilling it will come out when taking back out. Good luck!
If it's broken, it's not fixed.
|
|
« Next Oldest | Next Newest »
|
| Messages In This Thread |
|
Sheared a bolt - by bigbluebear - 08-12-13, 04:09 PM
Re: Sheared a bolt - by steeeve66 - 08-12-13, 04:18 PM
Re: Sheared a bolt - by ChristoT - 08-12-13, 04:21 PM
Re: Sheared a bolt - by Nosobrut - 08-12-13, 04:43 PM
Re: Sheared a bolt - by mickvp - 08-12-13, 05:11 PM
Re: Sheared a bolt - by bigbluebear - 08-12-13, 05:31 PM
Re: Sheared a bolt - by mickvp - 08-12-13, 05:46 PM
Re: Sheared a bolt - by wezdavo - 08-12-13, 05:47 PM
Re: Sheared a bolt - by bigbluebear - 08-12-13, 05:56 PM
Re: Sheared a bolt - by Nosobrut - 08-12-13, 06:14 PM
Re: Sheared a bolt - by Captain Haddock - 08-12-13, 06:30 PM
Re: Sheared a bolt - by steeeve66 - 09-12-13, 11:33 AM
Re: Sheared a bolt - by Dead Eye - 09-12-13, 02:40 PM
Re: Sheared a bolt - by nickodemon - 13-12-13, 01:12 AM
Re: Sheared a bolt - by unfazed - 15-12-13, 09:27 PM
|
