Dropped my bike (Putting her on the stand), need parts advice

[ltcorwin]

check the mirror carefully, i broke mine off in a crash but after looking at it it turned out only the screw inside where it pivots had sheared off, was an eaasy fix

Oh the mirror needs replaced, it was sheared off near the mounting point of the mirror.

I got the paerts today, took the old screen off, fitted the new mirror, refitted the LHS mirror to sort the loose rubber on that side.  Fitted the new screen , started up and noticed a vibration in the screen between 2 and 3 k rpm, tried adjusting the screen screws and managed to shear the head off one.  Fortunately I managed to get the thread out nof the hole, and have ordered these on Ebay

http://www.ebay.co.uk/itm/SCREEN-BOLT-KI...43c1796d2c

Oddly, after I did all that I noticed the vibration is less when the bike is off the stand, so we'll see what happens.  The replacement screen is a bit more scuffed than mine, but doesn't have a massive crack, maybe next time I drop a screen I'll get a slightly dearer one off Ebay that looks better, though this one looked fine on Ebay.  It took a bit of coercing into position, i think it's been out of a bike for too long.

Hopefully the new nuts will improve the vibration.

Needless to say I was being v careful putting the bike on to the centre stand today.

Thanks all for your help

LTC