22-11-13, 05:56 PM
Exup valve working fine, removed it for routine maintenance put it all back together again with a little copperease and wallop the bloody thing wont move jammed solid so rinse and repeat same story the valve seems to work fine right up until I tighten the bolts it'll turn then stick as if its bent or off centre somehow.
I've checked all the positions of the bushes, I laid them in order as I removed them cleaned them all with a little emery cloth and some brake cleaner, then a dousing with the old WD40, another wipe then a little copperease and back in, cant see what I've done wrong?????? :'( :wall
stupid design. What's wrong with a single flap in the link pipe??
has anyone thought of butchering an FZ1 link pipe and fusing it onto a 4-1 after market job??[size=78%] [/size]
I've checked all the positions of the bushes, I laid them in order as I removed them cleaned them all with a little emery cloth and some brake cleaner, then a dousing with the old WD40, another wipe then a little copperease and back in, cant see what I've done wrong?????? :'( :wall
stupid design. What's wrong with a single flap in the link pipe??
has anyone thought of butchering an FZ1 link pipe and fusing it onto a 4-1 after market job??[size=78%] [/size]
Fines are cheaper than front tyres!!