15-11-13, 12:47 PM
You will experience a little bit of fling but if the Scotoiler is set properly any excess should be minimal. I have one on both my Fazer and R1 and don't have a problem with either. I don't think the nozzle position will have any effect on the flow, probably just set too high.
I also read some where that Scotoil recommend using the heavier red oil in the older oilers, i started using it and get even less fling off.
Jim.
I also read some where that Scotoil recommend using the heavier red oil in the older oilers, i started using it and get even less fling off.
Jim.