Changing my coolant - any tips

[CRH]

[quote author=fazersharp link=topic=10671.msg112585#msg112585 date=1384128209]
Great help everyone
Eairler bike being a 98 so tank off for air filter, but will have a look see when im at the hinge point. will do the air filter first and then tank back hinged up and do cooent next, I have 5 litres of distilled water for the holts speed flush and following plain water flush. 2.5 ltr for each
Might chuck a load of tap water down and then rinse with the last 2.5ltr distilled water (cause im anal)
When im doing the speed flush do I need to fill up the resorvior with it also
And does the 1.95ltr cap as read in the haynes include the resorvior amount as it dosent seem much

....well i recon you best dilutin the water first?...with water..that way your saving water!!specialy if your on a water meter!! :rolleyes


You're going to rinse water with water? 
The book says you can use soft tap water anyway if you mix your own coolant, so if you're gonna use a premixed coolant after flushing then using tap water with the Radflush is absolutely fine.




[/quote]well i recon you should dilute the water first" with water!!..that way your saving water!!..specialy if your on a water meter?