How do you cope with glasses?

[mr self destruct]

Don't forget that you can adjust pinlock!

Pinlock "pins" on the visor are eccentric so by turning them you can tighten or loosen the seal between the insert and visor. You should be able to achieve a tight seal by positioning the insert correctly and adjusting correctly.

Depending on the type of pin, you might be able to adjust with a small flat blade or philips screwdriver, small spanner/socket whilst the insert is in place. If the pins are blank, they might be the type where you have to remove the insert, push and then turn the pin before refitting the insert.

Thought I'd remind folks as I've met loadsa people who weren't aware of this design feature  :rolleyes Worth checking yours is adjusted correctly before going to the lengths Mr self destruct did, although I imagine that's a sure way to get a good seal too.

I should have mentioned I adjusted the pins the first time I got the helmet!  :o