13-10-13, 04:35 PM
F.A.O Moderator - please leave this here for a couple of days so I can get feedback from ex FZS 600 owners.
Hi Guys,
I changed my clutch plates and springs to EBC heavy duty stuff. I also changed the chain and sprockets and broke the gear selector rod whilst doing so, therefore I had to change that too. When I built the clutch back up, I did it one piece at a time, so I know that side is ok.
So, today I assembled it all and when I pull the clutch lever - nothing happens. It is flaccid. I was wondering if I need to change the clutch cable to? It is probably the original one, so about 32K old. Will this solve my problem, or have I made an error somewhere else?
Any help appreciated
Hi Guys,
I changed my clutch plates and springs to EBC heavy duty stuff. I also changed the chain and sprockets and broke the gear selector rod whilst doing so, therefore I had to change that too. When I built the clutch back up, I did it one piece at a time, so I know that side is ok.
So, today I assembled it all and when I pull the clutch lever - nothing happens. It is flaccid. I was wondering if I need to change the clutch cable to? It is probably the original one, so about 32K old. Will this solve my problem, or have I made an error somewhere else?
Any help appreciated
Not quite sure what to do with my early mid-life crisis. Ideas on a post card to P.O.BOX 150...