|
choke cable problem
|
15-09-13, 11:49 AM
If you look on the carbs the choke cable pulls a bar which in turn pulls 4 little brass plungers (one on each carb). Each plunger is protected with a little rubber seal, pull it back with a little pick and lube the plunger with some oil and replace the seal. I did this with mine while i had the carbs off to fit an Ivan's kit and the choke is perfect, light and smooth to operate. You should be able to do this with the carbs in-situ.
Jim. |
|
« Next Oldest | Next Newest »
|
| Messages In This Thread |
|
choke cable problem - by solorider - 11-09-13, 09:16 PM
Re: choke cable problem - by solorider - 12-09-13, 09:13 PM
Re: choke cable problem - by ghostbiker - 12-09-13, 09:38 PM
Re: choke cable problem - by solorider - 14-09-13, 10:44 PM
Re: choke cable problem - by nick crisp - 14-09-13, 10:50 PM
Re: choke cable problem - by dazza - 15-09-13, 12:27 AM
Re: choke cable problem - by nick crisp - 15-09-13, 10:26 AM
Re: choke cable problem - by shrekster - 15-09-13, 11:49 AM
Re: choke cable problem - by solorider - 15-09-13, 11:17 PM
|
