07-09-13, 09:46 PM
Common problem with this model, unfortunately it was preventative by replacing the standard 9mm nut for the updated 12mm one.
I don't have the product number to hand but it is on many posts on this forum.
Hopefully if the drive shaft thread isn't overly damaged the new nut could help cut the thread, if not you're looking at welding the nut/ sprocket onto the shaft which can only be done a couple of times before its a case of replacing the drive shaft!
I don't have the product number to hand but it is on many posts on this forum.
Hopefully if the drive shaft thread isn't overly damaged the new nut could help cut the thread, if not you're looking at welding the nut/ sprocket onto the shaft which can only be done a couple of times before its a case of replacing the drive shaft!
Some say...