01-09-13, 12:52 AM
One of my dust seals is lifting and starting to rust slightly, i've already bought them, so i'll be replacing them while i'm fitting the new tyres, might as well whilst the front wheel is out.
I replaced the seals and dust covers on my Thruxton a few years ago, if you are replacing the seals as well, it isn't a difficult job as long as long as you make sure each fork is dismantled and re-assembled separately, so as not to get the parts mixed up.
I find it easier if when disassembling, the parts are laid out in the order they were removed, i use an old clean towel or similar.
G ; )
I replaced the seals and dust covers on my Thruxton a few years ago, if you are replacing the seals as well, it isn't a difficult job as long as long as you make sure each fork is dismantled and re-assembled separately, so as not to get the parts mixed up.
I find it easier if when disassembling, the parts are laid out in the order they were removed, i use an old clean towel or similar.
G ; )
Life's a long song....