Removing the throttle.

[Punkstig]

But if you ever needed to get it back off again would it not be stuck on & not slide off, or am i not picturing things properly as usual, is it more the case that the stuck on bit of the gear actually splits in half anyway so doesnt need to slide anywhere, just split & pulled apart????

Both the throttle housing and switchgear split in half if you undo the bolts completely!


If you use the foam tape all the way round then this is enough adhesive to stop any twisting forces from using the throttle breaking the bond, however you can still split and remove everything if needs be.


The bonus to doing it this way is you have an unmolested set of bars, if you ever change bikes its easier to reuse them or resell them without the drilled holes!