26-08-13, 08:19 PM
On picture 3 it does look like your bars are twisted, but it could just be the photo.
If you wanted to test the bars for being true, you can remove them from the bike (it takes 5 mins) and lay them on a flat surface (flagstones are good) then measure each side of the highest part of the bar bend to the floor. They should be exactly the same measurement. Just to make sure its right, spin the bars 180° and measure again.
Hopefully its the bars that are out. (Renthals alert ! ! !
. )
If you wanted to test the bars for being true, you can remove them from the bike (it takes 5 mins) and lay them on a flat surface (flagstones are good) then measure each side of the highest part of the bar bend to the floor. They should be exactly the same measurement. Just to make sure its right, spin the bars 180° and measure again.
Hopefully its the bars that are out. (Renthals alert ! ! !
. )
Stop polishing it and ride the bloody thing!!
![[Image: 850481.png]](http://badges.fuelly.com/images/sig-uk/850481.png)