20-08-13, 09:06 PM
I've done my 'chain/sprocket/12mm nut' over 2 weeks ago.
- Torqued at 80 Nm.
- No thread lock but copper grease.
- No play on the sprocket.
Done about 400 miles since then and it seems fine so far. Also replaced the gasket.
Nut/washer from Yam dealer for 2.44, and gasket for 3.66 delivered within two days.
- Torqued at 80 Nm.
- No thread lock but copper grease.
- No play on the sprocket.
Done about 400 miles since then and it seems fine so far. Also replaced the gasket.
Nut/washer from Yam dealer for 2.44, and gasket for 3.66 delivered within two days.