|
Fork Damper Rod
|
18-08-13, 11:33 AM
When i replaced the fork seals on the Thruxton, i whittled the end of a piece of dowling i had left over from a previous job until it fitted snugly into the tube , then i lightly tapped it into the tube and that enabled me to release the allen bolt at the bottom of the slider.
G ; )
Life's a long song....
|
|
« Next Oldest | Next Newest »
|
| Messages In This Thread |
|
Fork Damper Rod - by Dead Eye - 14-08-13, 10:52 AM
Re: Fork Damper Rod - by unfazed - 14-08-13, 11:13 AM
Re: Fork Damper Rod - by Dead Eye - 14-08-13, 11:17 AM
Re: Fork Damper Rod - by red98 - 14-08-13, 11:33 AM
Re: Fork Damper Rod - by Dead Eye - 14-08-13, 11:41 AM
Re: Fork Damper Rod - by Paul - 14-08-13, 01:53 PM
Re: Fork Damper Rod - by His Dudeness - 14-08-13, 06:06 PM
Re: Fork Damper Rod - by Jamieg285 - 15-08-13, 01:22 PM
Re: Fork Damper Rod - by Lawrence - 15-08-13, 09:58 PM
Re: Fork Damper Rod - by Dead Eye - 15-08-13, 10:02 PM
Re: Fork Damper Rod - by Lawrence - 15-08-13, 10:07 PM
Re: Fork Damper Rod - by Dead Eye - 15-08-13, 10:07 PM
Re: Fork Damper Rod - by BluprintZ - 18-08-13, 11:33 AM
Re: Fork Damper Rod - by Dead Eye - 26-08-13, 05:21 PM
Re: Fork Damper Rod - by Dead Eye - 27-08-13, 10:37 PM
Re: Fork Damper Rod - by Punkstig - 27-08-13, 10:48 PM
|
