17-08-13, 05:23 PM
When I had a 2000 boxeye I did the old green wire from the switch fix which brought on two dims but the main beam still was not great. I picked up a broken headlight from a local breaker open itand remover the right side reflector and other bits . Then opened my own one (carefull use of a heat gun to melt the glue holding it together) and removed the left reflector and replaced it with the right one from the one from the breaker.
A little bit of fiddling and setting up but I finally had two H4s like the Fox Eye and the Fazer 400 and now much better main beams. Took me nearly a full day to do, but was well worth the effort.
I am at present in the process of converting a European specification Fox Eye headlight to a Irish/English specification one by changing the reflectors. This is even easier to do than the box eye. Still trying to get my hands on a broken fox Eye headlight as I one I got had one cracked reflector.
A little bit of fiddling and setting up but I finally had two H4s like the Fox Eye and the Fazer 400 and now much better main beams. Took me nearly a full day to do, but was well worth the effort.
I am at present in the process of converting a European specification Fox Eye headlight to a Irish/English specification one by changing the reflectors. This is even easier to do than the box eye. Still trying to get my hands on a broken fox Eye headlight as I one I got had one cracked reflector.