11-08-13, 06:47 PM
It does not matter on the Fazers as long as the T on the rotor lines up with the mating surface of the crankcases.
This will have pistons 1 and 4 at the TDC and pistons 2 and 3 at BDC,then when you install the cams and time them correctly they will set numbe one cylinder to compression stroke.
This will have pistons 1 and 4 at the TDC and pistons 2 and 3 at BDC,then when you install the cams and time them correctly they will set numbe one cylinder to compression stroke.