29-07-13, 10:10 PM
What mileage is on you bike?
A complete cam chain means a major engine strip down as you need to lift out the crank to get the chain on and you cannot just seperate the crankcases as two of the crankcase bolts are under the barrel
. A split chain from an engine point of view is just the carburettors, alternator cover and cam cover and cam chain tensioner off first and then the plugs and cams out. Split the chain and attached the new chain to the split link. With your third hand, turn the engine over holding the chain tightly and feeding it through. Install the cams, join the chain, check the cam timing, install the tensioner, check cam timing again. Replace the cam covers, alternator cover and carburettors.
Max time about 6 hours for a split chain :eek (a very good mechanic could probably do it in 4
)
A complete cam chain means a major engine strip down as you need to lift out the crank to get the chain on and you cannot just seperate the crankcases as two of the crankcase bolts are under the barrel
. A split chain from an engine point of view is just the carburettors, alternator cover and cam cover and cam chain tensioner off first and then the plugs and cams out. Split the chain and attached the new chain to the split link. With your third hand, turn the engine over holding the chain tightly and feeding it through. Install the cams, join the chain, check the cam timing, install the tensioner, check cam timing again. Replace the cam covers, alternator cover and carburettors.Max time about 6 hours for a split chain :eek (a very good mechanic could probably do it in 4
)