carb balancing?

[darrsi]

Is adjusting the TPS important before/after balancing the carbs?
I'd just do it, except I don't have the security Torx bit

In the link i posted above i think he was just making sure the TPS wasn't in the wrong position before starting, it should be at 5000rpm anyway, so it doesn't hurt to check it beforehand.
If your TPS is all good then it'll already be on 5000rpm.


Then it says check it again after the carbs are balanced.


It's a tamper proof T25 torx driver that fits the TPS, the one with the hole in the middle of it.