manual camchain tensioner fitment guide

[devilsyam]

ok so here's how to fit

unit is off ebay and bloody good value for 35 quid



start off removing the old unit



8mm bolts



here's mine done 40k it will either pop out or you may need to give it a tap



new unit - i read the instruction but there were to general so here's my take

in simple terms place new adjuster into hole wind in the adjuster till the body backs away from the engine then rotate it till flush is achieved and bolt the unit in place





when in place start motor and yep it will sound like a bag nails slowly rotate clockwise untill it all quietens down to fay and you get a werring sound so back off
tighten lock nut job done

vid -- adjusting manual cam chain adjuster fazer 1000 01-05