|
Lubing EXUP Cables
|
04-07-13, 12:21 PM
Halfords sell a Bikehut oil thats got Teflon in it. Using a syringe with the hypo needle you can inject it directly into each cable at the servo. Needs a couple of goes & some just floods back but as soon as you put enough in past the highest point, gravity is on your side & it siphons down in a day or so, even quicker with heat from the engine. Did the same with the clutch cable, really works well.
|
|
« Next Oldest | Next Newest »
|
| Messages In This Thread |
|
Lubing EXUP Cables - by PieEater - 26-06-13, 10:52 AM
Re: Lubing EXUP Cables - by Exupnut - 26-06-13, 11:58 AM
Re: Lubing EXUP Cables - by sadlonelygit - 26-06-13, 12:36 PM
Re: Lubing EXUP Cables - by snapper - 26-06-13, 12:59 PM
Re: Lubing EXUP Cables - by PieEater - 28-06-13, 09:10 AM
Re: Lubing EXUP Cables - by fireblake - 01-07-13, 10:31 PM
Re: Lubing EXUP Cables - by PieEater - 02-07-13, 07:23 AM
Re: Lubing EXUP Cables - by Exupnut - 02-07-13, 08:03 AM
Re: Lubing EXUP Cables - by fireblake - 02-07-13, 08:07 AM
Re: Lubing EXUP Cables - by Capt - 04-07-13, 12:21 PM
Re: Lubing EXUP Cables - by Capt - 04-07-13, 12:55 PM
Re: Lubing EXUP Cables - by Capt - 05-07-13, 02:02 PM
Re: Lubing EXUP Cables - by fireblake - 05-07-13, 02:18 PM
Re: Lubing EXUP Cables - by fireblake - 04-07-13, 03:46 PM
|
