|
chain rivet
|
30-06-13, 02:11 PM
Thanks for checking. Mine are around 5.5mm. Probably +- 0.1mm. I should have measured the pin diameter and the hole diameter of the face plate before I riveted the link but like they say it's easy to be wise after the event. I might get another master link just for the sake of finding out.
|
|
« Next Oldest | Next Newest »
|
| Messages In This Thread |
|
chain rivet - by His Dudeness - 29-06-13, 09:02 PM
Re: chain rivet - by Lawrence - 29-06-13, 09:24 PM
Re: chain rivet - by His Dudeness - 29-06-13, 09:49 PM
Re: chain rivet - by keno - 30-06-13, 12:20 PM
Re: chain rivet - by His Dudeness - 30-06-13, 02:11 PM
Re: chain rivet - by elbrownos - 30-06-13, 02:40 PM
Re: chain rivet - by darrsi - 30-06-13, 03:27 PM
Re: chain rivet - by stevierst - 30-06-13, 04:28 PM
Re: chain rivet - by His Dudeness - 30-06-13, 05:19 PM
Re: chain rivet - by keno - 30-06-13, 09:57 PM
Re: chain rivet - by Lawrence - 01-07-13, 10:23 AM
Re: chain rivet - by Dead Eye - 01-07-13, 12:41 PM
Re: chain rivet - by stevierst - 01-07-13, 12:53 PM
Re: chain rivet - by Thorn - 01-07-13, 01:01 PM
Re: chain rivet - by Tibbs - 01-07-13, 01:50 PM
Re: chain rivet - by darrsi - 01-07-13, 03:28 PM
Re: chain rivet - by Andy FZS - 01-07-13, 09:38 PM
Re: chain rivet - by nick crisp - 01-07-13, 09:53 PM
Re: chain rivet - by darrsi - 01-07-13, 11:29 PM
Re: chain rivet - by nick crisp - 01-07-13, 11:35 PM
Re: chain rivet - by Lawrence - 01-07-13, 11:51 PM
|
