29-06-13, 08:10 PM
Check the neutral switch wiring, Paul. Sensor's on the back of the crankcase, behind the swingarm. Trace the single wire and see what you find.
Also, did you jump-wire the sidestand cut-out switch or just visually confirm that the wires are connected.
Since you changed the undertray, I'd also look very carefully at all the wiring connectors that you may have disturbed. In particular, the ignition cut-out relay which takes inputs from sidestand switch, neutral switch and clutch switch.
Also, did you jump-wire the sidestand cut-out switch or just visually confirm that the wires are connected.
Since you changed the undertray, I'd also look very carefully at all the wiring connectors that you may have disturbed. In particular, the ignition cut-out relay which takes inputs from sidestand switch, neutral switch and clutch switch.