11-06-13, 07:19 PM
I've done it a few times and its not to bad if you take your time, there shouldn't be to many wires to remove the immobiliser from your original loom. It can be quite scary the first time cutting into all that tape and seeing what your working with.
Your original loom will be colour coded so re-joining them should be pretty simple, even if you don't want to solder them, you can crimp them with a suitable connector although solder would be better, make sure you insulate each repaired wire separately .
Your original loom will be colour coded so re-joining them should be pretty simple, even if you don't want to solder them, you can crimp them with a suitable connector although solder would be better, make sure you insulate each repaired wire separately .