Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Usd Conversion
#9
(10-06-13, 01:25 PM)Punkstig link Wrote: I'd like to hear more about whether you notice any running problems as I've recently swapped my front end for a Tcat one, I'm contemplating swapping the clocks over so I can have the T'cat wheel in with 120/60 tyre but keeping the current speedo connected to the loom to avoid any errors!


[color=rgb(24, 36, 48)]I had a look at the wiring diagram and against what i have read the speedo is not connected to the Tps, it is connected to the speedo drive and the CDI box. [/color][color=rgb(24, 36, 48)]I just removed the Speedo drive from the loom now and took it on a little run. It runs fine.Maybe the problems start when people just remove the speedo drive and leave the clocks?

[/color]
"Its a Fazer Jim, but not as we know it"
Reply


Messages In This Thread
Usd Conversion - by Superfour Tom - 09-06-13, 08:23 PM
Re: Usd Conversion - by simonm - 09-06-13, 09:11 PM
Re: Usd Conversion - by Superfour Tom - 09-06-13, 09:16 PM
Re: Usd Conversion - by simonm - 09-06-13, 09:50 PM
Re: Usd Conversion - by Superfour Tom - 09-06-13, 09:54 PM
Re: Usd Conversion - by simonm - 09-06-13, 09:54 PM
Re: Usd Conversion - by Superfour Tom - 09-06-13, 10:04 PM
Re: Usd Conversion - by Punkstig - 10-06-13, 01:25 PM
Re: Usd Conversion - by Superfour Tom - 10-06-13, 01:50 PM
Re: Usd Conversion - by Punkstig - 10-06-13, 02:57 PM
Re: Usd Conversion - by Superfour Tom - 11-06-13, 01:17 AM
Re: Usd Conversion - by Punkstig - 11-06-13, 09:43 AM
Re: Usd Conversion - by Motorbreath - 11-06-13, 01:28 PM
Re: Usd Conversion - by Superfour Tom - 22-06-13, 03:24 AM
Re: Usd Conversion - by Superfour Tom - 24-06-13, 12:07 AM
Re: Usd Conversion - by Superfour Tom - 02-07-13, 12:18 AM
Re: Usd Conversion - by Superfour Tom - 02-07-13, 03:17 PM
Re: Usd Conversion - by simonm - 02-07-13, 05:15 PM
Re: Usd Conversion - by nick crisp - 02-07-13, 06:17 PM
Re: Usd Conversion - by simonm - 02-07-13, 06:23 PM
Re: Usd Conversion - by Superfour Tom - 02-07-13, 07:50 PM

Forum Jump:


Users browsing this thread: