fitting a yamaha endless chain

[AyJay]

Yup. Once again, the Fazer stuns with how easy it is to work on. Takes about half an hour to get the linkage out, maybe 10 mins for the swingarm after that. It's one bolt and you don't even need special tools. Well, just a big enough socket. Doddle.


The biggest problem I found was getting the exhaust can off. The gasket had seized solid and it took a lot of whacking and twisting to get it off.


But taking the swingarm out is one of the easiest jobs you can do and you get to grease your linkages whilst you're at it!