01-06-13, 09:30 PM
Hi,
serviced both front brakes today.
After clearing all the crud off the pistons I polished them with Autosol.
Shiny or what, they move in/out so easy.
That were the problem started, one fell out and brake fluid went all over the floor.
I pushed the piston back in very easily.
Can I bleed the brakes now knowing there could be a little brake fluid between the fluid seal and the dust seal.
Or should I pull out the pot (loose ALL the brake fluid) and dry between the two rubbers and re-insert the pot and add new fluid and bleed brakes.
what should I do now.......
serviced both front brakes today.
After clearing all the crud off the pistons I polished them with Autosol.
Shiny or what, they move in/out so easy.
That were the problem started, one fell out and brake fluid went all over the floor.
I pushed the piston back in very easily.
Can I bleed the brakes now knowing there could be a little brake fluid between the fluid seal and the dust seal.
Or should I pull out the pot (loose ALL the brake fluid) and dry between the two rubbers and re-insert the pot and add new fluid and bleed brakes.
what should I do now.......