23-05-13, 12:05 PM
because it will start when bumped and when you short the starter relay it is not the alarm or any of the saftey cut out switches, if you have replaced both the relays it only leaves the starter button its self or the 2 wires coming from it!
definately check the switch with a multimeter if you can or find a mate that can help you. the wiring diagram is in the haynes manual in the download section that will help.
good luck
definately check the switch with a multimeter if you can or find a mate that can help you. the wiring diagram is in the haynes manual in the download section that will help.
good luck