22-05-13, 01:44 PM
(22-05-13, 12:37 PM)clayt74 link Wrote: from the starter button the black wire goes to ground, but on the connector on the bike side there are 2 black wires 1 being the ground and the other connects to the blue/white on the switch side...... it is this black wire that should have 12 volts on it which gets shorted to zero when you push the starter button.
this 12 volts tho goes through the alarm connector and also the saftey cut off system that relies on your center stand switch working correctly and also the neutral switch.
bypassing the ignition will not help in any way if the problem is within the alarm or safety cut off circuit.
will the bike start if you bump start it??
Yes and if I use a Alan key on the starter relay it starts