18-05-13, 02:25 PM
As I don't have anything to compare to, I can only assume that the hyperpro springs push more of the top tube out of the fork lower, by 15mm and so you have to drop them by that amount to get the front ride height back to standard. The preload adjuster would allow a certain amount, but not 15mm. Plus then you'd still have a full range of preload.
Wow, it almost sounds like I know what I'm talking about.
This is just how my brain has reasoned. Like I say, the springs were already fitted when I bought the bike, so I don't know the standard lengths of the forks.
I would assume as well that the guys who make the suspension would know what they're doing, seeing as the kits/instructions are bike specific.
Wow, it almost sounds like I know what I'm talking about.
This is just how my brain has reasoned. Like I say, the springs were already fitted when I bought the bike, so I don't know the standard lengths of the forks.
I would assume as well that the guys who make the suspension would know what they're doing, seeing as the kits/instructions are bike specific.