17-05-13, 08:50 AM
(This post was last modified: 17-05-13, 08:51 AM by marksfazer.)
When i adjusted mine, I removed the tensioner from the engine via the 2 hex bolts, then I completely removed the centre bolt, the 2 springs and ball bearing.
Reset the tensioner, Refitted it back into engine, then refitted the little ball bearing, springs and bolt. As you wind in the centre bolt it will push the tenisoner out and tighten the slack on the chain.
Reset the tensioner, Refitted it back into engine, then refitted the little ball bearing, springs and bolt. As you wind in the centre bolt it will push the tenisoner out and tighten the slack on the chain.