11-05-13, 11:23 PM
Big job this mate are you sure it's leaking I've only known of two to fail and they were high mileage 70k plus?
Yes you will need a puller, gaskets, sealant, loctite and all the normal tools oh and a manual. Before you strip the motor do a compression check if all cylinders are well within limits you wont need to do the valves/rings, double check the compression rings once the heads off by doing a oil test.
Take your time read the manual a good few times, oh and don't be tempted to use cheap gaskets/seals you will regret it! Keep us posted good luck mate.
Yes you will need a puller, gaskets, sealant, loctite and all the normal tools oh and a manual. Before you strip the motor do a compression check if all cylinders are well within limits you wont need to do the valves/rings, double check the compression rings once the heads off by doing a oil test.
Take your time read the manual a good few times, oh and don't be tempted to use cheap gaskets/seals you will regret it! Keep us posted good luck mate.
Later