03-05-13, 06:54 AM
Make sure your spark plug caps are properly screwed in to the HT leads, you say you dried "the rubber parts" but there's a chance you may have undone them.
The rubber caps have a screw in them that literally screws into the middle of the wire of the HT cable.
Unscrew one of them and see what condition the inner cable is like, if it looks a bit ropey cut about 5mm off the end of the wire with some cutters then start afresh by screwing back into the middle of the new wire, making sure they're screwed in firmly, don't over do it.
The rubber caps have a screw in them that literally screws into the middle of the wire of the HT cable.
Unscrew one of them and see what condition the inner cable is like, if it looks a bit ropey cut about 5mm off the end of the wire with some cutters then start afresh by screwing back into the middle of the new wire, making sure they're screwed in firmly, don't over do it.
More people are born because of alcohol than will ever die from it.