23-04-13, 04:15 PM
Not familiare with the thou but some general thoughts
How has the tempature been running
What is the level like in the pressure cap on the thermostat housing when the bike is cold, if the seal is not good in the cap it will draw air in instead of sucking coolant back up from the resevoir as it cools down. Next time warms up pumps a bit more coolant out but draws air again on cooling, so on, - then resevoir overflows
Any sign of water in the oil (starts to go milky in apearance)
or oil in the water (blobs) - head gasket - water pump seal - oil cooler
Check spark plugs, make sure none are taking on a rusty apearance around the electode area - head ghasket
How has the tempature been running
What is the level like in the pressure cap on the thermostat housing when the bike is cold, if the seal is not good in the cap it will draw air in instead of sucking coolant back up from the resevoir as it cools down. Next time warms up pumps a bit more coolant out but draws air again on cooling, so on, - then resevoir overflows
Any sign of water in the oil (starts to go milky in apearance)
or oil in the water (blobs) - head gasket - water pump seal - oil cooler
Check spark plugs, make sure none are taking on a rusty apearance around the electode area - head ghasket