Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Scratches
#7
I would practice on the pannel you are replacing as this will help with how much preasure to place on them when applying the products. It may just sort it out as well.

Megs Clay Kit I always use this first if paint work needs doing or rewax
http://www.halfords.com/webapp/wcs/store...yId_255233

This is AutoGlym Paint Renovator (a little more abrasive) it does similar job as Meguiar's Paint Cleaner. You could use either if you do not want both.
http://www.halfords.com/webapp/wcs/store...ogId=10151

Megs Paint Cleaner
http://www.halfords.com/webapp/wcs/store...yId_165527

Megs Car Polish
http://www.halfords.com/webapp/wcs/store...65527#tab1

Megs Carnauba Wax
http://www.halfords.com/webapp/wcs/store...65527#tab1

Megs Soft Foam applicators any will do the job
http://www.halfords.com/webapp/wcs/store...ogId=10151

Gentle at first and follow the directions on the tin but work in the direction of the scratch. Before and after pics would be good.

Good luck

Daz

She Ain't Exactly Pretty, She Ain't Exactly Small, Fourt'two Thirt'ninefiftysix

You Could Say She's Got It All.
Reply


Messages In This Thread
Scratches - by Yamazer-92 - 18-04-13, 07:07 PM
Re: Scratches - by darrsi - 18-04-13, 07:24 PM
Re: Scratches - by dBfazer600 - 18-04-13, 07:41 PM
Re: Scratches - by Yamazer-92 - 18-04-13, 08:14 PM
Re: Scratches - by dBfazer600 - 18-04-13, 08:51 PM
Re: Scratches - by Yamazer-92 - 18-04-13, 09:20 PM
Re: Scratches - by dBfazer600 - 18-04-13, 10:41 PM
Re: Scratches - by Yamazer-92 - 18-04-13, 11:19 PM
Re: Scratches - by dBfazer600 - 19-04-13, 01:15 AM
Re: Scratches - by Yamazer-92 - 19-04-13, 09:09 PM
Re: Scratches - by Yamazer-92 - 19-04-13, 09:17 PM
Re: Scratches - by Yamazer-92 - 19-04-13, 09:24 PM
Re: Scratches - by Chris - 19-04-13, 09:36 PM
Re: Scratches - by dBfazer600 - 19-04-13, 09:41 PM
Re: Scratches - by Yamazer-92 - 19-04-13, 10:26 PM
Re: Scratches - by dBfazer600 - 19-04-13, 10:34 PM
Re: Scratches - by Chris - 19-04-13, 10:46 PM

Forum Jump:


Users browsing this thread: 1 Guest(s)